Cleaning the bathroom, especially the bathroom floor, is a stressful, time-consuming, and thankless endeavor. All it takes is one instance of walking in an unclean bathroom to turn your blood pressure into a barometer. Still, we all have to do it.
Bathrooms are one of the dirtiest places in our homes. The toilet, shelves, and tile floors can be full of bacteria, germs, and viruses. Whether you’re dealing with a wet or dry area, disinfecting bathroom floors can be a challenge because of all the chemicals and materials used. Cleaning your bathroom is such a task that you might find it challenging to do it yourself. This is where our guide will make your life easier.
Keep reading to know more!
IS IT NECESSARY TO DISINFECT BATHROOM FLOORS?
The short answer: you should always disinfect your bathroom floor, but if you don’t have the time, it’s not the end of the world. Why? Because your bathroom floor is made of tile, and tile is porous. That means that any microscopic bacteria on your floor will eventually be sucked into the cracks between tiles and flushed away by water running through those cracks.
Germs and bacteria can be found in all areas of the home, but bathrooms are especially susceptible to these nasty little bugs. Bathrooms are warm and moist environments, which are ideal for the propagation and growth of microorganisms. The floor of your bathroom is often covered in moisture from showers or baths.
For these reasons, it’s important to disinfect your bathroom floor regularly so that you can keep it clean and free of harmful pathogens.
BEST BATHROOM FLOOR DISINFECTANT YOU CAN FIND AT HOME
Bathroom floor disinfectant is a good way to keep your bathroom clean and free from bacteria. This is especially important if you have children or pets in your home because it can help stop the spread of germs. There are many different ways that you can make bathroom floor disinfectants, but some of these recipes have been shown to work better than others. In this section, we will be covering four different methods for making a homemade bathroom floor disinfectant that will help keep your family healthy
? White vinegar
Mix equal parts of vinegar and water in a spray bottle, then apply the mixture to your bathroom floor. Let it sit for 5 minutes, then wipe it clean with a clean cloth. Repeat as necessary until you’ve removed all of the stains from your bathroom floor.
? Vinegar and liquid soap
If you have a little time on your hands and are looking for a simple solution to stubborn bathroom floors, vinegar, and liquid soap are the way to go. In order to make this remedy work, you’ll need equal parts white vinegar and liquid soap (or dishwashing detergent). Once you’ve got your supplies together, apply the solution with either a sponge or rag to the floor. Let it sit for about 10 minutes before washing it off with warm water. Repeat as needed.
? Borax and soda
This solution is easy to make and very effective. All you need is borax and baking soda, which are both found in your pantry or can be purchased at any grocery store. To make this solution, combine 3 tablespoons of baking soda with 1 cup of borax powder in a plastic tub or bucket. Mix them together until they’re well combined.
Next, you’ll want to sprinkle the mixture onto your bathroom floor and use a scrub brush to clean it off with warm water (don’t mix this up with vinegar). Repeat until your entire bathroom has been cleaned!
You should use this mixture once per week as needed, but if you have hard water it may be more often depending on how often your tap water comes into contact with minerals before reaching your house.
The best way to store this mixture is by storing it in an airtight container such as an old margarine tub or Tupperware container so that no moisture can get into the contents inside! You can even label what’s inside so there’s no confusion later down the road when someone else wants something from storage.
? Ammonia and liquid soap
Mix 1 cup of household ammonia with a few drops of liquid soap and about 4 cups of water. The exact amounts don’t matter as much but try to keep them consistent from batch to batch so you can use your own ratios as a reference.
Then, apply the mixture to your floors using a mop or rag. Let it sit for about 10 minutes before rinsing with warm water and then drying off with either a towel or dry cloth.
? Fabric softener
Fabric softener also has some properties that make it useful for cleaning bathroom floors. It contains ingredients like alcohol, which can kill germs and bacteria. The product is also fragrance-free, so you don’t have to worry about any smells lingering in the air after you use it on your floor.
If you want to get rid of germs on your bathroom floor without spending money on expensive cleaners or disinfectants, consider using fabric softener instead!
TIPS TO DISINFECT BATHROOM FLOORS
There are many ways to disinfect bathroom floors, but the most important step is to clean them first. Cleaning your bathroom floor regularly will ensure that you don’t have any mold or mildew growing in it, which can be harmful to both your health and the appearance of your home. The following methods will help you get rid of any germs lurking inside your bathroom as well as restore its original beauty:
? Remove everything from the floor
Removing everything from your bathroom floor is the first step to keeping it clean and disinfected. If you don’t remove everything, the dirt and germs will just be pushed around by your cleaning efforts, which isn’t what you want at all!
? Check the corners of the bathroom
After you’ve completed the initial cleaning, it’s time to check the corners of your bathroom. If there is any mold or mildew present on your bathroom floor, this is usually where they’ll be lurking. Check for dirt, dust, and other debris that has been collected in these areas as well.
Finally, take a look at stains on your flooring. Do you have any rust or discoloration on the tile? If so, you may need to contact a professional to rectify this issue before disinfecting can begin.
? Clean your caulking
You’ll need to remove the caulking around your tub or shower to get a thorough cleaning. Use a caulk remover, but be sure not to get it on any other surfaces in your bathroom. Scrape off any excess with a razor blade, then clean the area with warm water and soap. Let it dry before putting your floor back together again, so you don’t trap mold inside your walls.
? Spray down the floor
Make sure you use a disinfectant that can kill viruses. Spray liberally and allow the disinfectant to sit for five minutes before wiping up with paper towels
Let your bathroom air out before you step back in. After you’ve wiped down your bathroom floor and allowed it to dry, open all of your windows and let fresh air circulate through the room for at least 20 minutes. This is especially important if you feel like something isn’t quite right with how clean your bathroom smells despite following our steps above!
? Use a mop to spread out the disinfectant.
Make sure you get all the corners, but not too much in one place, otherwise it’ll be harder to clean up than if you just used a spray bottle and some paper towels and rags. Don’t forget about cleaning around where your toilet sits on the floor! Cleaning under sinks is also a good idea; especially if they have been neglected for months or years like mine were!
When cleaning with bleach (or any other type of disinfectant), spray down your entire bathroom floor so that everything gets covered evenly in this liquid goodness! Make sure nothing dries out before wiping it up again though because then only half of your efforts would have been successful, which would mean fewer die-off bacteria growth happening around here.
? Use a squeegee when you’re done.
After you’re done, use a squeegee to remove excess water. Squeegee left to right, not up and down as this may cause scratches on the floor. Also, make sure you’re using a clean towel to dry the floor; otherwise, it’ll just spread more germs around!
Bonus: PROPER WAYS TO CLEAN BATHROOM
Cleaning the bathroom is not only a chore, but it can be quite an unhealthy task. If you don’t follow the proper cleaning procedures and if you use improper cleaning products, then it might end up doing more harm than good.
As a result, here are some helpful hints on how to clean your bathroom properly:
STEP 1 – Drain hair from the tub
In the tub, you can use a drain snake to clean hair from the drain. You can also use a drain cleaner to clean the drain, or a plunger to clear it of debris like hair. If none of those work for you, try using a brush or other device designed specifically for cleaning drains.
If your showerhead isn’t spraying water properly and only emitting drops instead, remove it from its mounting bracket and use a screwdriver or wrench on its base in order to remove any buildup inside that may be causing problems with its ability to deliver water evenly throughout its length (and then replace).
STEP 2 – Get rid of soap scum
While you’re in the shower, you may notice a build-up of soap scum on your tub or shower walls. This is caused by hard water and not cleaning your bathtub every week. To get rid of it, use a brush or sponge to scrub away any stubborn spots until they’re gone.
STEP 3 – Clean out the toilet
The next step is to clean the toilet bowl. This can be done by using a toilet brush and flushing it down the toilet. You can also use a plunger in order to clear any blockages that may be present. If there are stains on the seat and lid, then you need to use disinfectant spray or wipes on both of these surfaces before they dry out completely.
STEP 4 – Freshen up the floors
You might have noticed that the floor of your bathroom is not as clean as it used to be. This is especially true if you have tile or hardwood floors in this area. To fix this problem, simply vacuum and mop your floor using the method of your choice. If you need a little extra help with the job, try using a steam cleaner or sweeping with a broom!
STEP 5 – Wash down the walls and vanity
The final step in cleaning a bathroom is to wash down the walls and vanity. You can use a sponge and warm water to wipe them down, or you can use a mild detergent if you need to if there’s something on them that won’t come off with water alone.
After washing it down, dry off both areas with a soft cloth until they’re completely dry. Be sure to wipe down any faucets so they don’t get sticky or moldy over time. Once everything is dry, you can finish up by wiping down mirrors with glass cleaner (or just plain water) so they’re bright and shiny once again!
STEP 6 – Scrub down the sink
It is also important to clean out your sink. If the drain is clogged up and not draining at all well then try unclogging it with an auger or snake tool (also known as a drain auger). The most common places that these tools are used are toilets and bathtubs because they tend to get clogged up often due to hair/soap buildup inside them which makes them hard to use properly without any problem occurring!
We hope this article helped you find the best bathroom floor disinfectant and ways to disinfect your bathroom floors. It’s important to know that any of these remedies will work, but it’s also crucial that you test them first so that they don’t damage your floors! If none of these options sound like what you need or want, feel free to check out our other helpful articles on other types of cleaning solutions too.
As you can see, cleaning the bathroom floor is not an easy task. There are many things that we need to do and there are also many ways we can do it. This article has given you some tips on how to clean your bathroom floor properly so that it looks good as new and stays clean for longer!