So you ask yourself, why is a vacuum cleaner louder than normal when you turn it on? Well, there are a few reasons for this. Vacuum cleaners are machines, so they are expected to be loud. But if the nose becomes irritating and you noticed that it is not as loud as when you first bought it, then this article is for you.
Keep reading to know where the noise comes from and learn how to fix it!
IS IT NORMAL FOR VACUUM CLEANERS TO BE LOUD?
It’s normal for vacuum cleaners to be loud, but it’s unusual when they’re new.
The noise is caused by the motor spinning quickly. It usually gets quieter as you use it and wear down the brushes. But the noise level of a vacuum cleaner is important to consider, especially if you are planning on using it in a small apartment or an office.
Some vacuums are designed to be quieter than others, but even those will make some noise when they run. And if you think that your vacuum cleaner is getting louder than usual, check the next section.
REASONS WHY VACUUM CLEANER IS LOUDER THAN NORMAL
A vacuum cleaner is one of the basic household appliances in every home. In spite of being such an important appliance, most of us don’t pay attention to it until it starts making weird noises or stops working altogether. Vacuums can make a lot of noise, and those noises are usually caused by problems associated with suction power or debris stuck inside the machine. If you notice sudden changes in your vacuum’s sound then there might be something wrong with its operation that needs to be fixed before it does any damage. Here are the following major reasons.
? Debris might be stuck in the vacuum nozzles
If you have a loud vacuum cleaner, it might be because there is debris stuck in the vacuum nozzles. You can check this by unplugging your vacuum cleaner and removing the brush roll from its holder.
It should be fairly easy to remove using a screwdriver or other tool that comes with your vacuum cleaner if not already provided by it. Once you have removed the brush roll, inspect both ends of it for any debris or hair clumps that may be causing an obstruction in your nozzles.
If there is any trash stuck inside one of these openings, use tweezers or some type of cleaning tool to remove it and then put everything back together again before running another test run on how loud your machine still sounds after everything has been replaced properly onto their designated spots on top of each other again (brush roll on top).
? The power switch may be bad or broken
If you’ve determined that your vacuum cleaner is functioning as intended, but it’s still a lot louder than usual, there are a few things to check. A common issue is that the power switch may be bad or broken. It can also happen if there is any debris stuck in the vacuum nozzles. If this happens often enough, it can cause more wear on your machine and make it loud out of habit rather than just when starting up or shutting down.
Another potential problem could be if there is a weakness in the suction seal between your flooring surface and carpeting, rugs, or mats below them. This will allow some vibrations from these materials through into other areas like handles where they would otherwise have been contained within panels designed specifically for this purpose only.
? The roller brush could be broken, or it might not be turning
If the roller brush is not turning, then it will make a lot of noise. The roller brush should be turning when you vacuum. If it isn’t, then there could be something wrong with your vacuum cleaner or a part of it.
If you hear a loud clicking sound coming from inside your vacuum cleaner and feel like it is going to explode, this means that the motor is overheating and shutting down to prevent damage to itself or other parts of the machine. This can happen if you are using too much power on any given area while cleaning, but especially when working with thick carpeting or rugs. This may also happen if there is something stuck in the hose that prevents airflow through that opening so as to cool off both motors more quickly than normal (or possibly even burn them out).
? There may be a weakness in the suction seal
If you are experiencing a loud noise, there may be a weakness in the suction seal. A vacuum cleaner is designed to seal off the suction area between the hose and the main body of your machine. This prevents air from escaping from this area when you turn on the machine. If there is a weakness in the suction seal, then you will have a loud noise when you turn it on because all of that air that should be being sucked into your machine escapes instead!
If this is happening to you, then there is no need to panic! All you need to do is find out what kind of material was used for our original seals and order replacements online so that they can be shipped right away!
? There may be a blockage in the hose
If your vacuum cleaner is making loud sounds, there may be a blockage in the hose or there might be a clog in the vacuum cleaner.
- Check if the hose is kinked.
Kinks can cause resistance and make it harder for air to flow through.
- Check if there’s a blockage in the vacuum cleaner.
If you hear loud noises every time you use your machine, this means that something is stuck inside of it and needs to be cleaned out by an expert technician who will check it thoroughly before determining what exactly has caused this issue and how best to fix it without having to buy another one!
WHAT TO DO IF THE VACUUM CLEANER IS TOO LOUD?
Now that you know that a loud vacuum is not normal, what to do next? Check the list below.
1. Check the vacuum settings.
The first thing you should do is check your vacuum cleaner’s settings. If the suction power is set to high and the brush is spinning, it will make more noise than usual. If you’re using a vacuum cleaner on a hard floor or carpet mode, it will also sound louder than when in soft floor mode.
If none of these factors are causing the noise problem, then there may be another issue at hand:
2. Clean the filters on time.
If you are a frequent vacuum cleaner user and you have pets, then you will need to clean the filters regularly. To do this, turn off your vacuum cleaner and remove the dust container or bag. Open up the top of the machine by pressing down on it and pulling back on it at the same time. You can now see all of those small parts that go into making your vacuum cleaner work properly. Remove each one and clean them with a damp cloth or cotton swab dipped in alcohol. Once they are dry, reassemble everything before using them again!
3. Empty the dustbin regularly.
If you are using your vacuum daily, you should empty the dustbin after every use. If you don’t do this, then the dirt will build up and clog the vacuum cleaner and make it louder. If you only use it occasionally, then emptying it once a week is sufficient.
4. Avoid sucking up liquids, sand, and other debris that could damage the motor.
Avoid sucking up debris that is not suitable for your vacuum cleaner because this could damage the motor.
If you must use a wet/dry vacuum on carpeting or any other type of flooring, make sure to attach appropriate attachments for that purpose first before turning it on (some vacuums have special attachments designed specifically for their use with carpets).
5. Check if there are objects stuck.
If there is a blockage, it can be easily removed. First, check the filter and remove any clumps or dirt from it. Next, check the hoses and tubes for any obstruction. You may need to disassemble these parts in order to inspect them properly. After that, check the collection bin to see if there are any lint or foreign objects stuck in it. If necessary, unblock it by tapping on its sides with an appropriate object such as a screwdriver handle or wooden spoon handle until all unwanted debris falls out of your vacuum cleaner’s body cavity.
6. Cleanly wipe off all dust and debris from the vacuum cleaner cover, wheels, and body.
Use a damp cloth to clean the vacuum cleaner or use a vacuum cleaner brush to remove dust and dirt from the body of your machine. If your vacuum cleaner has rotating brushes, switch them on occasionally. This will help to remove any hair or dirt buildup that could result in a loss of suction power.
The vacuum cleaner has been subject to constant change and modification as it has developed over time. From the first machine to the larger, more sophisticated versions of today, it is clear that there has been a vast amount of research in order to improve the machines’ functionality. And being loud is something that companies are trying to develop. So if you bought a new vacuum cleaner that is a quieter version, but it’s still too loud, then you can say that there’s something really wrong with it. Contact customer service as soon as possible.